spinn_front_end_common.utilities.utility_objs.extra_monitor_scp_messages package

Module contents

class spinn_front_end_common.utilities.utility_objs.extra_monitor_scp_messages.GetReinjectionStatusMessage(x, y, p)

Bases: spinnman.messages.scp.abstract_messages.scp_request.AbstractSCPRequest

An SCP Request to get the status of the dropped packet reinjection

Parameters:

• x (int) – The x-coordinate of a chip, between 0 and 255
• y (int) – The y-coordinate of a chip, between 0 and 255
• p (int) – The processor running the extra monitor vertex, between 0 and 17

get_scp_response()

Get an SCP response message to be used to process any response received

Returns:An SCP response, or None if no response is required Return type:spinnman.messages.scp_response.SCPResponse Raises:None – No known exceptions are raised

class spinn_front_end_common.utilities.utility_objs.extra_monitor_scp_messages.GetReinjectionStatusMessageResponse(command_code)

Bases: spinnman.messages.scp.abstract_messages.scp_response.AbstractSCPResponse

An SCP response to a request for the dropped packet reinjection status

read_data_bytestring(data, offset)

See spinnman.messages.scp.abstract_scp_response.AbstractSCPResponse.read_data_bytestring()

reinjection_functionality_status

class spinn_front_end_common.utilities.utility_objs.extra_monitor_scp_messages.ResetCountersMessage(x, y, p)

Bases: spinnman.messages.scp.abstract_messages.scp_request.AbstractSCPRequest

An SCP Request to reset the statistics counters of the dropped packet reinjection

Parameters:

• x (int) – The x-coordinate of a chip, between 0 and 255
• y (int) – The y-coordinate of a chip, between 0 and 255
• p (int) – The processor running the extra monitor vertex, between 0 and 17

get_scp_response()

Get an SCP response message to be used to process any response received

Returns:An SCP response, or None if no response is required Return type:spinnman.messages.scp_response.SCPResponse Raises:None – No known exceptions are raised

class spinn_front_end_common.utilities.utility_objs.extra_monitor_scp_messages.SetReinjectionPacketTypesMessage(x, y, p, multicast, point_to_point, fixed_route, nearest_neighbour)

Bases: spinnman.messages.scp.abstract_messages.scp_request.AbstractSCPRequest

An SCP Request to set the dropped packet reinjected packet types

Parameters:

• x (int) – The x-coordinate of a chip, between 0 and 255
• y (int) – The y-coordinate of a chip, between 0 and 255
• p (int) – The processor running the extra monitor vertex, between 0 and 17
• point_to_point (bool) – If point to point should be set
• multicast (bool) – If multicast should be set
• nearest_neighbour (bool) – If nearest neighbour should be set
• fixed_route (bool) – If fixed route should be set

get_scp_response()

Get an SCP response message to be used to process any response received

Returns:An SCP response, or None if no response is required Return type:spinnman.messages.scp_response.SCPResponse Raises:None – No known exceptions are raised

class spinn_front_end_common.utilities.utility_objs.extra_monitor_scp_messages.SetRouterEmergencyTimeoutMessage(x, y, p, timeout_mantissa, timeout_exponent)

Bases: spinnman.messages.scp.abstract_messages.scp_request.AbstractSCPRequest

An SCP Request to set the router emergency timeout for dropped packet reinjection

Parameters:

• x (int) – The x-coordinate of a chip, between 0 and 255
• y (int) – The y-coordinate of a chip, between 0 and 255
• p (int) – The processor running the extra monitor vertex, between 0 and 17
• timeout_mantissa (int) – The mantissa of the timeout value, between 0 and 15
• timeout_exponent (int) – The exponent of the timeout value, between 0 and 15

get_scp_response()

Get an SCP response message to be used to process any response received

Returns:An SCP response, or None if no response is required Return type:spinnman.messages.scp_response.SCPResponse Raises:None – No known exceptions are raised

class spinn_front_end_common.utilities.utility_objs.extra_monitor_scp_messages.SetRouterTimeoutMessage(x, y, p, timeout_mantissa, timeout_exponent)

Bases: spinnman.messages.scp.abstract_messages.scp_request.AbstractSCPRequest

An SCP Request to the extra monitor core to set the router timeout for dropped packet reinjection

Parameters:

• x (int) – The x-coordinate of a chip, between 0 and 255
• y (int) – The y-coordinate of a chip, between 0 and 255
• p (int) – The processor running the extra monitor vertex, between 0 and 17
• timeout_mantissa (int) – The mantissa of the timeout value, between 0 and 15
• timeout_exponent (int) – The exponent of the timeout value, between 0 and 15

get_scp_response()

Get an SCP response message to be used to process any response received

Returns:An SCP response, or None if no response is required Return type:spinnman.messages.scp_response.SCPResponse Raises:None – No known exceptions are raised

class spinn_front_end_common.utilities.utility_objs.extra_monitor_scp_messages.ClearReinjectionQueueMessage(x, y, p)

Bases: spinnman.messages.scp.abstract_messages.scp_request.AbstractSCPRequest

An SCP Request to set the dropped packet reinjected packet types

Parameters:

• x (int) – The x-coordinate of a chip, between 0 and 255
• y (int) – The y-coordinate of a chip, between 0 and 255
• p (int) – The processor running the extra monitor vertex, between 0 and 17

get_scp_response()

Get an SCP response message to be used to process any response received

Returns:An SCP response, or None if no response is required Return type:spinnman.messages.scp_response.SCPResponse Raises:None – No known exceptions are raised

class spinn_front_end_common.utilities.utility_objs.extra_monitor_scp_messages.LoadApplicationMCRoutesMessage(x, y, p)

Bases: spinnman.messages.scp.abstract_messages.scp_request.AbstractSCPRequest

An SCP Request to write the application multicast routes into the router.

Parameters:

• x (int) – The x-coordinate of a chip, between 0 and 255
• y (int) – The y-coordinate of a chip, between 0 and 255
• p (int) – The processor running the extra monitor vertex, between 0 and 17

get_scp_response()

Get an SCP response message to be used to process any response received

Returns:An SCP response, or None if no response is required Return type:spinnman.messages.scp_response.SCPResponse Raises:None – No known exceptions are raised

class spinn_front_end_common.utilities.utility_objs.extra_monitor_scp_messages.LoadSystemMCRoutesMessage(x, y, p)

Bases: spinnman.messages.scp.abstract_messages.scp_request.AbstractSCPRequest

An SCP Request to write the system multicast routes into the router

Parameters:

• x (int) – The x-coordinate of a chip, between 0 and 255
• y (int) – The y-coordinate of a chip, between 0 and 255
• p (int) – The processor running the extra monitor vertex, between 0 and 17
• command_code – the command code used by the extra monitor vertex for setting system multicast routes.

get_scp_response()

Get an SCP response message to be used to process any response received

Returns:An SCP response, or None if no response is required Return type:spinnman.messages.scp_response.SCPResponse Raises:None – No known exceptions are raised